Click image to view full size image
APG 0810H65 (APG 215 CS UP)
Chemical description
Aqueous solution of alkyl polyglucosides based on a fatty alcohol C8 - C10
Â
Labeling information
INCI name: Caprylyl/Decyl Glucoside
CAS-No.: 68515-73-1
Synonyms: Decyl Glucoside
Â
Product properties
Appearance
Light yellow viscous liquid
Physical properties
Solid Content(%) Â Â Â Â Â Â Â Â Â Â Â Â Â 62-65
Water (wt %) Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 35-38
pH Value (20% aq.) Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 11.5-12.5
Free Alcohol (wt %) Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 0.7max
Viscosity (mPa·s),40°C                  500-1500
Sulfated Ash (wt %) Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 3max
Density(g/cm3),25°C                    1.14-1.16
Product guidance
 APG 0810H65 exhibits excellent caustic stability and solubility in caustic and saline solutions.Due to its good wetting and dispersing properties APG 0810H65 can be used for caustic, neutral and acidic hard surface cleaning for the household and institutional sector. APG 0810H65 shows excellent solubilizing properties in highly concentrated surfactant solutions also in the presence of salt and alkalies.
Â
Processing Instructions
Â
 APG 0810H65 is self-preserved via an elevated pH level. Due to this elevated pH, APG 0810H65 is hazy in appearance. By reducing the pH value, e.g., with citric acid to below 8.5 the cloudiness being specific for the product disappears thus also enabling the formulation of clear products.Below pH 11.5 APG 0810H65 is no longer sufficiently protected against microbial contamination, that means the end formulation has to be preserved in a suitable way.
Â
APG 0810H65 exhibits excellent solubility, stability, surface and interfacial activity in concentrated saline and alkaline solutions. It may also be used as a coupling agent in concentrated surfactant systems and in the presence of salt and alkalies. APG 0810H65 is compatible with all other classes of surface active agents. APG 0810H65 can be easily stored and handled at room temperature.
Â
Storage and transportation
APG 0810H65 can be stored in sealed original containers protected from frost and below 40 °C for at least 1 year.
Â
Maximum Storage Temperature - recommended maximum storage temperature of APG 0810H65 is 43°C. When heating, avoid prolonged localized temperatures exceeding 43°C to avoid possible product discoloration. Use tempered water when possible.
Â
Low pressure steam is acceptable if the product is monitored regularly.
Â
Bulk storage material – Carbon steel should not be used to store or handle APG 0810H65 due to probable contamination by iron. Recommended plastic drum or IBC made of high density polyethylene (HDPE) are both acceptable.
http://www.jeslyee.com/